+ Reply to Thread
Results 1 to 2 of 2

Thread: Awaiting TFTP

  1. 04-15-2012 05:39 PM #1
    tocson
    tocson is offline
    Junior Member
    Join Date
    Apr 2012
    Posts
    1

    Awaiting TFTP

    Hi,
    after updated my I-tech 8000 to the lastest firmware with Hiq 3.1 I have this message displayed:
    Loader v0.3
    Corrupt Image
    Awaiting TFTP
    rebooting did not solve the issue. I posted the log file along.
    https://skydrive.live.com/redir.aspx...434&parid=root
    regards,
    François
    Reply With Quote Reply With Quote
  2. 04-26-2012 08:12 PM #2
    Graham
    Graham is offline
    Administrator Graham's Avatar
    Join Date
    Nov 2010
    Location
    Salt Lake City, Utah
    Posts
    25
    You could try to load up the firmware from bootloader mode. To put the amp in 'bootloader' mode, press the reset button while powering up the amp. Hold the reset button down for 5-10 seconds after booting. There will be limited communications at this point, but thw amp should show up in the firmware updater in System Architect and the firmware can be loaded as normal.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules